Subscribe to get 10% off.
Sign up for 10% off your first purchase! Plus exclusive updates, new arrivals & insider only discounts.
Your email address














⟳ Dispatched by Our Partner
Please Note: This product is shipped from our Partner Warehouse and must be ordered separately from other items.
When low water pressure gets you down, power it up with our Giantz 6-stage Water Pump. It is the perfect solution where constant on-demand water pressure is needed at the open and close of any tap. You will find our water pump particularly useful for homes, household gardens, farms or any situation where pressurised water is consistently required. The water pump features an IP-rated motor, full stainless steel pump body, cast iron ends, 1.25'' inlet and 1'' outlet ports, corrosion-resistant brass connectors, efficient cooling system and not least, built-in thermal protection. Pumping out at a rate of Max 200L/min with a 70m head, the water pump can send water up to two stories high effortlessly. You can also accurately control the pressure to your precise requirements with the fully automatic controller and monitor it at a glance of the pressure gauge. Power to the pump is as simple as plugging it straight into any Australian standard socket. Whether you are using the pump as a permanent installation or on an ad hoc basis, you can be assured of dependable and reliable water supply in more ways than one.
Features
Powerful self-priming multi-stage pump
Garden irrigation, farm irrigation and home water supply
100% duty cycle - designed for continuous operation
Rust-resistant stainless steel pump body with cast iron ends
Fully automatic operation on/off controller
Max Huge 70m head
Anti-corrosive alloy motor housing, ceramic and carbon seals
Built-in thermal protection
Efficient cooling system
Highly conductive copper motor
Corrosion-resistant brass connector
Leak proof rubber ring
Easy connecting plug and cable
Fully automatic pressure controller
Adjustable start-up pressure
Australian standard cable and plug
Specifications:
I. IMPORTANT WARNING - PROHIBITED USES:
This pump is NOT designed for heavy-duty industrial, commercial, or hydraulic applications. STRICTLY PROHIBITED for use with elevator systems, industrial machinery, or as a power unit for any equipment beyond its capacity. Misuse will void the warranty and may cause product failure.
II. Operating Scope & Limitations
Home garden watering and irrigation
Transferring water from rainwater tanks or wells
Boosting water pressure in domestic pipelines
Circulating water in ponds or small fountains
Absolutely not suitable for powering hydraulic elevator systems, heavy machinery, or in any continuous high-load operation.
Ensure the electrical supply matches the pump's requirement.
III.Specification
Pump:
Rated input power:1300W
Max input power: 2500W
Plug and cord: SAA 250V/10A *0.3m
Max pump flow: 12,000L/h (200L/min)
Max head: 70m
Duty cycle: Continuous
Impeller Stainless steel
Pump body: Stainless steel
Motor shaft: Stainless steel
Inlet diameter: 1.25'' (30mm)
Outlet diameter: 1'' (25mm)
Brass connector: 1''
Protection class: IP44
Insulation class: B (130℃)
Max ambient temperature: 40℃
Max liquid temperature: 60℃
Controller:
Voltage: 220/240V
Frequency: 50/60Hz
Maximum current: 10A
Maximum water temperature: 60℃
Starting pressure: 1.5-3bar
Maximum pressure for use: 10bar
Protection grade: IP65
Inlet and outlet size: 1''(25mm)
Dimensions: 22cm x 15cm x 15cm
Weight: 1.5kg
Package Content
Giantz 6-stage Water Pump x 1
Pump Controller x 1
User manual x1
This product comes with 1 year warranty
Shipments to the specific postcode-suburb combinations below are excluded. If you wish to proceed with orders to these zones with additional shipping costs, please reach out to us for assistance.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
In order to organise a return under these terms and conditions, you must notify us via the Contact Form within 30 days of taking delivery of your product and request a return under this Policy. To be eligible for a return, your item must be unopened and in the same condition that you received it. It must also be in the original packaging, along with all included accessories, and must not be damaged in any way, so we can sell them as brand new product. Please do not send your purchase back to the manufacturer. To complete your return, we require a receipt or proof of purchase.
Note: As per our return policy we unfortunately cannot accept "change of mind" cancellation on products shipped from our Partner Warehouse.